Function:

Based on an IF or AGC sample provided, generate AGC Voltage to be utilized by AGC-controlled stages

Input/Output:

• POWER: 9-15 VDC, 5.5 x 2.5mm power jack
• SIG IN: Zin >= 20K, RCA Jack
• AGC OUT: Zout <= 200 ohms; RCA Jack

Operator Controls:

• Switch: ON/OFF/MANUAL

Key Specs or Limitations:

• Input signals of 3 V p-p cause maximum AGC output (i.e. 2.5V); no signal causes near 0 V output
• Full Wave Rectified Detection
• Using switch, AGC may be turned ON or OFF, or a Manual Gain pot may be placed in circuit, with output 0-2.5 V

Misc Notes: